Posts Tagged ‘sight gauge’

New law requires oil heat system upgrade – Boston Real Estate – Boston.com

Under a new Massachusetts oil heating law which went into effect on September 30, 2011, every homeowner with an oil heating system is required to install an oil safety valve or an oil supply line with protective sleeve in their system. The cost is approximately $150 to $350 depending on the system. The required upgrade is to prevent leaks from tanks and pipes that connect to your furnace. The upgrade will reduce the risk of an oil leak so by making a relatively small expenditure now, you can prevent a much greater expense in the future.Who Must Upgrade?
Owners of 1- to 4-unit residences that are heated with oil must already have or install an oil safety valve or an oil supply line with a protective sleeve. Installation of these devices must be performed by a licensed oil burner technician. Technicians are employed by companies that deliver home heating oil or are self-employed. It is important to note that heating oil systems installed on or after January 1, 1990 most likely are already in compliance because state fire codes implemented these requirements on new installations at that time.

Who Is Exempt? Homeowners are exempt from taking these leak prevention steps if: • the oil burner is located above the oil storage tank and the entire oil supply line is connected to and above the top of the tank OR • an oil safety valve or oil supply line with protective sleeve was installed on or after January 1, 1990, AND • those changes are in compliance with the oil burning equipment regulations; a copy of the oil burner permit from the local fire department may be used to demonstrate compliance.

www.ksentry.com

Inspectors from the state Department of Environmental Resources are ramping up efforts to find unregistered fuel storage tanks, as one local farmer discovered when he was recently fined by the DEP because he had not obtained a permit for his 8,000-gallon tank.

Why the increased scrutiny?

According to DEP spokesman Kevin Sunday, there was no one specific instance that sparked the agency’s actions to seek out unregistered fuel tanks.

“This is something that the department has been aware of for some time,” Sunday said, “and with the winter months coming up, we wanted to get everyone on board.”

The DEP’s effort, Sunday said, “is to make sure we register both in-ground and above-ground tanks that are not currently registered.”

So in October, DEP sent letters to 1,172 fuel oil providers across the state asking them to help find unregistered tanks. Fuel distributors are required to ask the tank owner to provide a DEP-issued registration certificate before any fuel (gasoline, diesel fuel or kerosene) can be placed in the tank.

“If the distributors deliver product to an unregistered storage tank, they are also liable for any damages” that may occur if fuel escapes from a leaky tank, Sunday said.

If DEP is not aware of unregistered tanks, it cannnot conduct routine inspections on them and the tanks could pose a threat to the environment if the tank or its pipes fail.

Read more: http://lancasteronline.com/article/local/543126_Got-a-permit-for-that-storage-tank-.html#ixzz1gKr8vuzo

This is the standard Therma Gauge Model designed to measure liquid level.  The base construction for this sight gauge is galvanized wetted rods with HDPE Floats and an Aluminum Bushing.  Other options are available for increased compatibility with various liquids.

This mechanical gauge is custom made in house to fit your tank.  Our flexible production process allows for custom sizes that range from 6 inches to 144 inches in total length.  We can also customize the level indicator to accommodate for double walls and pipe risers.  For more info on sizes, see the Sight Gauge Order Help

Standard Krueger sight gauges are best known in the petroleum equipment industry for providing inexpensive yet reliable liquid level fill gauges for all types of tanks.  Yet with the growing amount of alternative fuels including bio diesel and E-85, we found it advantageous to create sight gauge packages that include all stainless steel or all plastic components.  This created an excellent side effect.

Our sight gauges can now handle extremely aggressive chemicals including Sulfuric Acid and Hydrochloric Acid.  Some chemical sight gauge examples include:

• All stainless steel chemical fill gauge construction – E-85, Bio Diesel, Peroxide, Nitric Acid, Caustics, Calcium Chloride, KOH, and more.
• All plastic chemical sight gauge construction – Peek Plastic Option – Phosphoric Acid, Hydrochloric Acid, Bleach, and more.
• All plastic chemical fill gauge construction – Kynar Plastic Option – Chlorine, Sulfuric Acid, and more.

Visit the Krueger Gauge website for more Fill Gauge options.

Lee Geurts